| Job Title: Aircraft Maintenance Engineer - M1 | Job Code: 7315.01 |
| Date: | Author: Bonita Rogers |
| Job Location: Whitehorse Yukon Canada | |
| Report To: Director of Maintenance | Status: |
Job Summary:
“Troubleshoot Systems – The systems in an aircraft work together but also be able to survive if another system fails. A large part of the AME ’s job is to carefully and systematically track down system faults that can range from hydraulic leaks to problems with the satellite phone system.” (BC)
“ Bend and Form Sheet Metal – The airframe of an aircraft is its structural skeleton.” Some exteriors of aircraft are “carefully fitted sheet metal, usually aluminum, which can be replaced without major disruptions to the integrity of the aircraft.” (BC)
“Repair Engines and Turbine Assemblies – Gas turbine engines contain thousands of parts. Each part has a service life and must be replaced or re-machined according to a rigorous schedule that has been worked out by the aircraft manufacturer.” (BC)
“Undertake Emergency Repairs – Aircraft can sometimes have mechanical difficulties at remote airfields. Sometimes AME ’s are required to travel to the aircraft and repair it with their mobile tool kits and the spare parts they carry. Working in the field, away from well-equipped machine shop, can be challenging and sometimes requires innovation, which makes pulling off a complicated repair in the field a rewarding experience.” (BC)
“Perform Routine Maintenance on Schedule – At times there can be many simultaneous demands on an AME ’s time, so these workers learn to prioritize and organize responsibilities. Routine maintenance must be fit into a busy maintenance hanger. Though aircraft look sleek and shiny, underneath the gleaming exterior is a seething mass of friction points that cries out for regular lubrication.” (BC)
“Formal Documentation of Repairs – You have a legal responsibility to ensure the airworthiness of all repairs performed by you or performed under your supervision, and these must be recorded in a log book. As soon as a flight crew takes possession of an aircraft, they look in this book to see that the aircraft is safe and cleared by you. Full documentation of all work carried out is maintained in a separate file.” (BC) In this day and age, all entries in the log books are used to let everyone know the work that was carried out by the engineers and also to convey to Transport Canada that the work necessary was carried out with due diligence.
MAY “supervise and Assign Work – Because AME ’s are highly trained workers, they often are put in charge of technicians and non-licensed mechanics. The AME must carefully supervise their work and assign tasks based on each crew member’s skill and experience.” (BC)
Will work on aircraft set out in the “Scope of Work” approved by Transport Canada .
Responsibilities:
Primary responsibilities lie in your technical expertise. Secondary responsibilities are clerical and managerial.
Responsibility For:
| Major Responsibility For | |
| Equipment Operation | |
| Use of Tools | X |
| Material Usage | X |
| Protection of Equipment | X |
| Protection of Tools | X |
| Protection of Materials | X |
| Personal Safety | X |
| Safety of Others | XX |
| Others' Work Performance | X |
| Correct Procedures Manuals | X |
| Documentation of Work | X |
| Customer Relations / Trust | X |
| Aircraft Maintenance | 70% |
| Technical Logs | 10% |
| Shop and Tool Maintenance | 5% |
| Customer Support and Customer Relations | 5% |
| Training and Supervisory | 10% |
Qualifications:
MUST have an M-1 License
4 Year Apprenticeship
Will require Human Factors Training
Conditions of Work:
Most work performed in a hanger in Whitehorse Yukon but must be willing to occasionally travel and work on aircraft in the field.
Must be willing to work at the float dock out in the wind, cold and rain when necessary.
Must be willing to work occasional overtime.
Must be willing to work alternative shifts if needed.
“Must have good colour vision and hearing.” (BC)
“Must be a good communicator.” (BC)
“Must be able to bend, lift and stretch.” (BC)
“Must work well under pressure.” (BC)
“Must have an excellent memory.” (BC)
Must work well individually and in groups.
Must be willing to train others and be trained.
Must be willing to adhere to the Safety Management Systems being developed.
Must undergo internal training and examination process on Aircraft Type, Regulatory Policies and Maintenance Policy Procedures.
Willing to work on all single engine and dual engine small aircraft outlined in “Scope of Work” (Attachment B)
Summary
“Aircraft Mechanical Engineers “M-1” – are certified to do the broadest range of tasks so their work environments are varied. Work usually takes place indoors in hangers but from time to time they are required to work outdoors if repairs need to be made quickly or if no hanger space is available. AME -M’s often work under time pressure to maintain slight schedules, yet have a responsibility to maintain safety standards. This can cause the job to be stressful. AME -M’s often oversee the work of apprentices and technicians. The work environment is generally noisy, smelly and dirty, and AME -M’s are often required to stand, lie or kneel in awkward positions. Work on wings and fuselages is required, so AME -M’s must be comfortable working at heights. These workers must be able to lift and position heavy engine parts and aircraft components. AME -M’s can expect shift work.” (BC)
Documentation to be Presented Upon Hire
Technical Training Records
Human Factors Certificated
First Aid Training
WHYMIS
Hearing Test
Medical
Drivers License
The Job Description has been modified from the original by the BC Government and Canadian Government WEBSITE __________________ to suit this individual shop.